HP MSR2000/3000/4000 Router Series Interface Command Reference

75
Syntax
phy-mru mrusize
undo phy-mru
Default
The MRU of an AM interface is 1700 bytes.
Views
AM interface view
Predefined user roles
network-admin
Parameters
mrusize: Maximum receive unit (MRU) to be set, in the range of 4 to 1700 bytes.
Usage guidelines
This command applies to only interfaces operating in asynchronous flow mode.
Examples
# Set the MRU of interface Analogmodem 6/3/0 operating in flow mode to 1500 bytes.
<Sysname> system-view
[Sysname] interface analogmodem 6/3/0
[Sysname-Analogmodem6/3/0] async-mode flow
[Sysname-Analogmodem6/3/0] phy-mru 1500
Related commands
async-mode
reset counters interface
Use reset counters interface to clear the statistics for an AM interface.
Syntax
reset counters interface [ analogmodem [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
analogmodem interface-number: Specifies an AM interface by its number.
Usage guidelines
When you collect traffic statistics for a specific period of time on an AM interface, clear the existing
statistics on the interface.
• If you do not specify the analogmodem keyword, this command clears statistics on all interfaces.
• If you specify the analogmodem keyword without the interface-number argument, this command
clears statistics on all AM interfaces.