4000 Router Series Interface Command Reference

0 deferred

# Display brief information about interface BRI 1/0.

<Sysname> display interface bri 1/0 brief

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

Bri1/0 ADM UP(s) --

# Display brief information about all BRI interfaces in physically DOWN state and the causes.

<Sysname> display interface bri brief down

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Interface Link Cause

Bri1/0 ADM Administratively

Table 13 Command output

Field Description

Bri1/0

Current state

Physical state of the interface:

• DOWN (Administratively)—The BRI interface has been shut

down with the shutdown command.

• DOWN—The BRI interface is physically shut down because no

physical link is present or the physical link has failed.

• UP—The BRI interface is both administratively and physically

up.

Line protocol state Link protocol state of the interface.

Description Description of the interface.

Bandwidth Intended bandwidth of the interface.

Maximum Transmit Unit MTU of the BRI interface.

Baudrate Baudrate of the BRI interface.

Timeslot(s) Used Time slot used by the BRI interface.

Internet protocol processing Network layer protocol processing state.

Link layer protocol PPP Link layer protocol of the interface.

LCP initial LCP has been successfully initialized.

Output queue - Urgent queuing Packets statistics of urgent output queue.

Output queue - Protocol queuing Packets statistics of protocol output queue.

Output queue - FIFO queuing Packets statistics of FIFO output queue.

Last 5 seconds input rate 0.00 bytes/sec,

0 bits/sec, 0.00 packets/sec

Average input rate in the last 5 seconds.

Last 5 seconds output rate 0.00

bytes/sec, 0 bits/sec, 0.00 packets/sec

Average output rate in the last 5 seconds.