HP MSR2000/3000/4000 Router Series Interface Command Reference

83
Predefined user roles
network-admin
Parameters
rai: Remote Alarm Indication (RAI).
Usage guidelines
This command is applicable when the interface operates in CE1 mode.
Examples
# Enable RAI detection on CE1/PR1 interface E1 2/0.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] alarm-detect rai
cable (CE1/PRI interface)
Use cable to set the cable type for a CE1/PRI interface.
Use undo cable to restore the default.
Syntax
cable { long | short }
undo cable
Default
The long keyword applies.
Views
CE1/PRI interface view
Predefined user roles
network-admin
Parameters
long: Sets the attenuation of receiver to –43 dB.
short: Sets the attenuation of receiver to –10 dB.
Examples
# Set the cable length matching CE1/PRI interface E1 2/0 to short.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] cable short
channel-set (CE1/PRI interface)
Use channel-set to bundle timeslots on the CE1/PRI interface into a channel set.
Use undo channel-set to cancel the bundling.