HP MSR2000/3000/4000 Router Series Interface Command Reference

91
Predefined user roles
network-admin
Parameters
7e: Sets the line idle code to 0x7E.
ff: Sets the line idle code to 0xFF.
Usage guidelines
The line idle code is sent in timeslots that are not bundled with logical channels.
Examples
# Set the line idle code to 0x7E on interface E1 2/0.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] idle-code 7e
itf (CE1/PRI interface)
Use itf to set the type of and the number of interframe filling tags on the CE1/PRI interface. Two types of
interframe filling tag are available: 0x7E and 0xFF.
Use undo itf to restore the default.
Syntax
itf { number number | type { 7e | ff } }
undo itf { number | type }
Default
Interframe filling tag is 0x7E and the number of interframe filling tags is 4.
Views
CE1/PRI interface view
Predefined user roles
network-admin
Parameters
number number: Sets the number of interframe filling tags (an interframe filling tag is one byte in length),
in the range of 0 to 14.
type { 7e | ff }: Sets the type of interframe filling tag to 0x7E by specifying the 7e argument or to 0xFF
by specifying the ff keyword.
Usage guidelines
Interframe filling tags are sent when no service data is sent on the timeslots bundled into logical channels
on the CE1/PRI interface.
Examples
# Set the type of interframe filling tag to 0xFF on interface E1 2/0.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] itf type ff