4000 Router Series Interface Module Guide

• Full duplex and half-duplex, with the former in common use

Interface attributes

The interface attributes of the FIC-16FSW/DFIC-24FSW are shown in the following table:

Table 135 Interface attributes of the FIC-16FSW/FIC-16FSW-PoE/DFIC-24FSW/DFIC-24FSW-PoE

Attribute

FIC-16FSW/FIC-16FSW-PoE

module

DFIC-24FSW/DFIC-24FSW-PoE module

Connector

RJ-45

SFP

Interface type MDI/MDIX

Number of connectors

16 x 100 Mbps RJ-45 connectors

one 1000 Mbps RJ-45 connectors

One SFP connector

24 x 100 Mbps RJ-45 connectors

Two 1000 Mbps RJ-45 connectors

Two SFP connectors

Cable type

Standard (straight-through) Ethernet cable

Crossover Ethernet cable

Operating mode

10/100 Mbps autosensing

Full/half duplex

NOTE:

MDI stands for Media Dependent Interface of the Ethernet. Normally, the interfaces on the network cards

belong to this type. Cross Media Dependent Interface (MDIX) is usually adopted on HUBs or LAN switches.

Interface LEDs

FIC-16FSW panel is shown in the following figure:

Figure 97 FIC-16FSW panel

FIC-16FSW-PoE panel is shown in the following figure:

Figure 98 FIC-16FSW-PoE panel

DFIC-24FSW panel is shown in the following figure: