4000 Router Series Interface Module Guide

Attribute FIC-1GBE

FIC-2GBE

Number of connectors 1 2

Interface type MDI/MDIX

Interface standard 802.3, 802.3u, and 802.3ab

Cable type Ethernet cable

Operating mode

10/100/1000 Mbps auto-sensing

Half-duplex/full duplex, autosensing

Interface LEDs

The following figures show the FIC-1GBE and FIC-2GBE panels.

Figure 103 FIC-1GBE panel

Figure 104 FIC-2GBE panel

The following table describes the LEDs on the FIC-1GBE/FIC-2GBE panel.

Table 142 LEDs on the FIC-1GBE/FIC-2GBE panel

LED Descri

tion

LINK

• OFF means no link is present;

• ON means a link is present.

ACT

• OFF means no data is being transmitted or received.

• Flashing means data is being transmitted and/or received.

Fiber ports, optical fibers, and the connection method

For more information about fiber ports, optical fibers, and the connection methods, see "Fiber port."

FIC-1GEF/FIC-2GEF

Introduction

FIC-1GEF/FIC-2GEF, the 1-port/2-port 1000Base-SX/1000Base-LX GE optical interface module, is used

for router-to-LAN communication.

The modules support: