4000 Router Series Interface Module Guide

114

Table 165 FIC-1CE3 interface attributes

Attribute Description

Connector SMB

Number of connectors

Interface standard

G.703

G.704

G.751

Interface rate

34.368 Mbps

Cable type

E3 cable (75-ohm coaxial cable)

Operating mode

CE3

Supported service

E3 leased line

Interface LEDs

The following figure illustrates an FIC-1CE3 panel.

Figure 120 FIC-1CE3 panel

The following table describes the LEDs on the module panel.

Table 166 LEDs on the FIC-1CE3 panel

LED Descri

tion

LINK/ACT

• ON means the carrier signal has been received.

• OFF means no carrier signal has been received.

• Flashing means data is being transmitted or/and received.

LP/AL

• ON means the interface is in a loopback.

• Flashing means an AIS, LFA, or RAI alarm signal is present.

• OFF means no loopback or alarm is present.

Note:

AIS = Alarm indication signal; LFA = loss of frame alignment; RAI = Remote alarm indication

Interface cables and the connection methods

For more information about E3 interface cables and the connection methods, see "E3/T3 interface."