HP MSR2000/3000/4000 Router Series Interface Module Guide

11
SIC-1T1-F
Introduction
1-port Fractional T1 interface module supports:
• Transmission/Receiving and handling of T1 data streams;
• Remote loopback and local loopback, facilitating the effective and flexible debugging;
• Multiple purposes through different configurations.
The FT1 operating mode supported by the SIC-1T1-F module allows only one bundle. The time slots can
only be bundled into one n x 56 kbps channel, where n is in the range of 1 to 24.
The SIC-1T1-F does not support the PRI mode.
Interface attributes
The interface attributes of SIC-1T1-F are shown in the following table:
Table 16 Interface attributes of SIC-1T1-F
Attribute Description
Connector type RJ-45
Number of connectors 1
Interface standard
• G.703/T1.102
• G.704
• AT&T TR 54016
• AT&T TR 62411
• ANSI T1.403
Interface rate 1.544 Mbps
Cable type T1 cable (100-ohm standard shielded network cable)
Operating mode FT1
Supported service
• Backup
• Terminal access
Interface LEDs
SIC-1T1-F panel is shown in the following figure:
Figure 11 SIC-1T1-F panel
The status description for the LEDs is shown in the following table: