HP MSR2000/3000/4000 Router Series Interface Module Guide

170
Item Descri
p
tion
Polarization type Vertical
Maximum input power 5 W
Interface TNC
Height 21.4 cm (8.43 in)
Weight 50.5 g (1.78 oz)
Color Black
Operation temperature –40°C to +85°C (–40°F to +185°F)
Installing a 4G interface module antenna
1. Change the angle of the antenna orientation from vertical to horizontal.
2. Fasten the antenna onto the antenna port that has a MAIN mark. Avoid over-tightening.
Change the antenna orientation to vertical to achieve better signal coverage.
Installing a 4G interface debugging antenna
A 4G interface module has a Mini USB port to connect to the peer device through the USB console cable
for third-party software to debug the 4G interface module. When the interface module is operating
correctly, you do not need to connect the USB console cable.
To debug a 4G interface module, connect the port at one end of the USB console cable to the peer
device (PC), and connect the other end to the Mini USB port on the interface module.