4000 Router Series Interface Module Guide

• Allowing you to set the dual-pair G.SHDSL interface to operate in dual-pair or single-pair mode.

Interface attributes

Table 84 Interface attributes of the MIM-1SHL-4W

Attribute MIM-1SHL-4W

Connector RJ-11

Number of connectors 1

Interface standard

ITU-T G991.2

ITU-T G994.1 handshaking

Interface rate

In single-pair mode, supports the sending and receiving independent

symmetric rates in the range from 192 kbps to 2312 kbps in steps of 8

kbps.

In dual-pair mode, supports the sending/receiving independent

symmetric rates in the range from 384 kbps to 4624 kbps in steps of 16

kbps.

Interface cable Tailor-made 4-wire telephone cable

Supported services G.SHDSL access over ordinary telephone lines

Interface LEDs

The following figure illustrates the MIM-1SHL-4W panel:

Figure 57 MIM-1SHL-4W panel

The following table describes the LEDs on the MIM-1SHL-4W panel.

Table 85 LEDs on the MIM-1SHL-4W panel

LED Descri

tion

LINK

• OFF means no link is present.

• ON means a link is present.

ACT

• OFF means no data is being transmitted or received.

• Flashing means data is being received or transmitted.

Interface cables and the connection methods

For more information about G.SHDSL interface cables and the connection methods, see "G.SHDSL

interface."

Serial interface module

• MIM-2SAE

• MIM-4SAE

• MIM-8SAE