4000 Router Series Interface Module Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

• MIM-8ASE

• MIM-16ASE

MIM-2SAE/MIM-4SAE/MIM-8SAE

Introduction

MIM-2SAE/MIM-4SAE/MIM-8SAE stands for 2/4/8-port enhanced high-speed

synchronous/asynchronous serial interface module. In terms of function, SAE modules are the same as

SA modules except that SAE modules support more protocols, for example, RS449, X.21, and RS530.

Interface attributes

The interface attributes of SAE modules are shown in the following table:

Table 86 Interface attributes of MIM-2SAE/MIM-4SAE/MIM-8SAE

Attribute

Description

Synchronous Asynchronous

Connector D28

Number of connectors

2 (MIM-2SAE)

4 (MIM-4SAE)

8 (MIM-8SAE)

Interface standard and

operating mode

V.24

V.35, RS449, X.21,

RS530

RS232

DTE, DCE DTE, DCE

Minimum baud rate

(bps)

1200 1200 300

Maximum baud rate

(bps)

64 k 2.048 M 115.2

Cable

• V.24 (RS232) DTE cable

• V.24 (RS232) DCE cable

• V.35 DTE cable

• V.35 DCE cable

• X.21 DTE cable

• X.21 DCE cable

• RS449 DTE cable

• RS449 DCE cable

• RS530 DTE cable

• RS530 DCE cable

Supported service

• DDN leased line

• Terminal access service

• Dialup through modems

• Backup

• Asynchronous leased line

• Dumb terminal access

Interface LEDs

MIM-2SAE panel is shown in the following figure: