4000 Router Series Interface Module Guide

Figure 58 MIM-2SAE panel

MIM-4SAE panel is shown in the following figure:

Figure 59 MIM-4SAE panel

The following table describes the LEDs on the MIM-2SAE/MIM-4SAE panel:

Table 87 Description for the LEDs on the MIM-2SAE/MIM-4SAE panel

LED Descri

tion

LINK

• OFF means no link is present;

• ON means a link is present.

ACT

• OFF means no data is being transmitted or received;

• Flashing means data is being received or/and transmitted.

MIM-8SAE panel is shown in the following figure:

Figure 60 MIM-8SAE panel

On MIM-8SAE module, each link corresponds to a LED. ON means the link is connected. Flashing

means data is being transmitted or received.

Interface cables and the connection methods

For more information about synchronous/asynchronous serial port cables, see

"Synchronous/asynchronous serial ports."

MIM-8ASE/MIM-16ASE

Introduction

The 8/16-port enhanced asynchronous serial interface module (MIM-8ASE/MIM-16ASE)

transmits/receives and handles asynchronous serial interface data streams. ASE modules, however, use

RJ-45 connectors and AUX cables.

Interface attributes

The interface attributes of MIM-8ASE/MIM-16ASE are shown in the following table:

Table 88 Interface attributes of MIM-8ASE/MIM-16ASE

Attribute

Description

MIM-8ASE module MIM-16ASE module