4000 Router Series Interface Module Guide

Table 107 HMIM-24GSW/HMIM-24GSW-PoE GE LED description

LED Descri

tion

Off No link is present.

Steady green A 1000 Mbps link is present.

Flashing green The interface is sending or receiving data at 1000 Mbps.

Steady yellow A 10/100 Mbps link is present.

Flashing yellow The interface is sending or receiving data at 10/100 Mbps.

Interface cables and the connection methods

For more information about the Ethernet interface cables and the connection methods, see "Ethernet

interface."

Ethernet interface module

• HMIM-2GEE

• HMIM-4GEE

• HMIM-8GEE

• HMIM-2GEF

• HMIM-4GEF

• HMIM-8GEF

HMIM-2GEE/HMIM-4GEE/HMIM-8GEE

Introduction

The HMIM-GEE module is used to complete the communication between a router and a LAN, which

includes the following types:

• HMIM-2GEE—2-port 10Base-T/100Base-TX/1000Base-T Ethernet electrical interface module

• HMIM-4GEE—4-port 10Base-T/100Base-TX/1000Base-T Ethernet electrical interface module

• HMIM-8GEE—8-port 10Base-T/100Base-TX/1000Base-T Ethernet electrical interface module

The HMIM-2GEE/HMIM-4GEE/HMIM-8GEE supports:

• A transmission distance of 100 m (328.08 ft) over Category 5 twisted-pair cables.

• Operation at 10/100/1000 Mbps and autosensing.

• Full duplex and half-duplex, autonegotiation.

Interface specifications

Table 108 HMIM-2GEE/HMIM-4GEE/HMIM-8GEE interface specifications

Item HMIM-2GEE

HMIM-4GEE

HMIM-8GEE

Connector type RJ-45

Number of connectors 2 4 8

Interface type MDI/MDIX