HP MSR2000/3000/4000 Router Series Interface Module Guide

76
Item HMIM-2GEE HMIM-4GEE HMIM-8GEE
Interface standard 802.3, 802.3u, and 802.3ab
Supported cable Ethernet cable
Operating mode
10/100/1000 Mbps, autosensing
Full duplex/half-duplex, autonegotiation
Interface LEDs
Figure 73 HMIM-2GEE panel
Figure 74 HMIM-4GEE panel
Figure 75 HMIM-8GEE panel
Table 109 HMIM-2GEE/HMIM-4GEE/HMIM-8GEE LED description
LED Descri
p
tion
LINK
OFF means no link is present.
ON means a link is present.
ACT
OFF means no data is being transmitted or received on the interface.
Flashing means data is being transmitted and/or received.
Interface cables and the connection methods
For more information about the Ethernet interface cables and the connection methods, see "Ethernet
interface."
HMIM-2GEF/HMIM-4GEF/HMIM-8GEF
Introduction
The HMIM-GEF module is used to complete the communication between a router and a LAN. It includes
the following types:
• HMIM-2GEF—2-port 10Base-T/100Base-TX/1000Base-T Ethernet optical interface module
• HMIM-4GEF—4-port 10Base-T/100Base-TX/1000Base-T Ethernet optical interface module
• HMIM-8GEF—8-port 10Base-T/100Base-TX/1000Base-T Ethernet optical interface module
The HMIM-2GEF/HMIM-4GEF/HMIM-8GEF supports:
• Five types of 1000BASE-SX/1000BASE-LX SFPs: