4000 Router Series Interface Module Guide

LED Descri

tion

LP/AL

• ON means the interface is in a loopback.

• OFF means no loopback or alarm is present.

• Flashing means an alarm indication signal (AIS), loss of frame alignment (LFA)

signal, or remote alarm indication (RAI) signal is present.

Interface cables and the connection methods

For more information about T3 interface cables and the connection methods, see "E3/T3 interface."

Serial interface module

• HMIM-4SAE

• HMIM-8SAE

HMIM-4SAE/HMIM-8SAE

Introduction

The 4-port SAE module (HMIM-4SAE) and 8-port SAE module (HMIM-8SAE) are enhanced high-speed

synchronous/asynchronous serial interface modules. In terms of function, SAE modules are the same as

SA modules except that SAE modules support more protocols, for example, RS449, X.21, and RS530.

Interface specifications

Table 123 HMIM-4SAE/HMIM-8SAE interface specifications

Item S

nchronous

Connector type D28

Number of connectors

4 (HMIM-4SAE)

8 (HMIM-8SAE)

Interface standard and

operating mode

V.24 V.35, RS449, X.21, and RS530

RS232

DTE and DCE DTE and DCE

Minimum baud rate (bps) 1200 1200 300

Maximum baud rate (bps) 64 k 2.048 M 115.2

cable type

V.24 (RS232) DTE cable

V.24 (RS232) DCE cable

V.35 DTE cable

V.35 DCE cable

X.21 DTE cable

X.21 DCE cable

RS449 DTE cable

RS449 DCE cable

RS530 DTE cable

RS530 DCE cable