HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

4
Syntax
MSR2000/MSR3000:
display igmp-snooping
router-port [ vlan vlan-id ]
MSR4000:
display igmp-snooping
router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the dynamic router ports on the MPU. (MSR4000.)
Examples
# Display information about the dynamic router ports in VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2
VLAN 2:
Router slots (1 in total):
1
Router ports (2 in total):
Eth1/1 (00:01:30)
Eth1/2 (00:00:23)
Table 3 Command output
Field Descri
p
tion
Router slots (1 in total)
Total number of cards where the dynamic router ports reside and the slot IDs of the
cards.
Router ports (2 in total) Total number of dynamic router ports and the port list.
(00:01:30)
Remaining time of the aging timer for the dynamic router port.
On the MSR4000 router, to display the remaining time for a port that is not on the
MPU, you must specify the slot slot-number option.
Related commands
reset igmp-snooping router-port
display igmp-snooping static-group
Use display igmp-snooping static-group to display information about static IGMP snooping forwarding
entries.
Syntax
MSR2000/MSR3000: