4000 Router Series IP Multicast Command Reference

101

Related commands

• pim state-refresh-capable

• state-refresh-interval (PIM view)

• state-refresh-ttl (PIM view)

state-refresh-ttl (PIM view)

Use state-refresh-ttl to set the TTL value of state refresh messages.

Use undo state-refresh-ttl to restore the default.

Syntax

state-refresh-ttl ttl-value

undo state-refresh-ttl

Default

The TTL value of state refresh messages is 255.

Views

PIM view

Predefined user roles

network-admin

Parameters

ttl-value: Specifies a TTL value of state refresh messages, in the range of 1 to 255.

Examples

# Set the TTL value of state refresh messages to be 45 on the public network.

<Sysname> system-view

[Sysname] pim

[Sysname-pim] state-refresh-ttl 45

Related commands

• pim state-refresh-capable (PIM view)

• state-refresh-interval (PIM view)

• state-refresh-rate-limit (PIM view)

static-rp (PIM view)

Use static-rp to configure a static RP.

Use undo static-rp to remove a static RP.

Syntax

static-rp rp-address [ acl-number | preferred ] *

undo static-rp rp-address

Default

No static RP is configured.