HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

103
Syntax
timer hello interval
undo timer hello
Default
The global interval for sending hello messages is 30 seconds.
Views
PIM view
Predefined user roles
network-admin
Parameters
interval: Sets the interval for sending hello messages, in the range of 0 to 18000 seconds. If the value for
this argument is 0, no hello messages are sent.
Usage guidelines
You can set the interval for sending hello messages in PIM view or interface view. The configurations
made in PIM view take effect on all interfaces, and the configurations made in interface view take effect
only on the current interface. If you set the interval in both PIM view and interface view, the configuration
in interface view always takes precedence.
Examples
# Set the global interval for sending hello messages to 40 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer hello 40
Related commands
pim timer hello
timer join-prune (PIM view)
Use timer join-prune to set the global interval for sending join/prune messages.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The global interval for sending join/prune messages is 60 seconds.
Views
PIM view
Predefined user roles
network-admin