HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

106
Table 31 Command output
Field Descri
p
tion
Interface Interface name.
Index Index number of the interface.
Current state
Current status of the interface:
• Up.
• Down.
MTU MTU value.
Type
Interface type:
• BROADCAST—Broadcast link interface.
• P2P—P2P interface.
• LOOP—Loopback interface.
• REGISTER—Register interface.
• NBMA—NBMA interface.
• MTUNNEL—Multicast tunnel interface.
Protocol Protocol running on the interface: PIM-DM, PIM-SM, PIM-BIDIR, and MLD.
PIM protocol state
Whether IPv6 PIM is enabled:
• Enabled.
• Disabled.
Address list Interface address list.
Local address Local IP address.
Remote address Remote end IP address. This field is displayed when the interface is vlink type.
Reference Address reference count.
State Status of the interface address: NORMAL or DEL.
display ipv6 multicast boundary
Use display ipv6 multicast boundary to display IPv6 multicast boundary information.
Syntax
display ipv6 multicast [ vpn-instance vpn-instance-name ] boundary { group [ ipv6-group-address
[ prefix-length ] ] | scope [ scope-id ] } [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays IPv6 multicast boundary
information on the public network.