4000 Router Series IP Multicast Command Reference

115

# Configure Ethernet 1/1 to be the forwarding boundary of the IPv6 multicast groups in the admin-local

scope.

<Sysname> system-view

[Sysname] interface ethernet 1/1

[Sysname-Ethernet1/1] ipv6 multicast boundary scope 4

Related commands

display ipv6 multicast boundary

ipv6 multicast routing

Use ipv6 multicast routing to enable IPv6 multicast routing and enter IPv6 MRIB view.

Use undo ipv6 multicast routing to disable IPv6 multicast routing.

Syntax

ipv6 multicast routing [ vpn-instance vpn-instance-name ]

undo ipv6 multicast routing [ vpn-instance vpn-instance-name ]

Default

IPv6 multicast routing is disabled.

Views

System view

Predefined user roles

network-admin

parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. If this option is not specified, the command enables IPv6 multicast routing on the

public network.

Usage guidelines

You must enable IPv6 multicast routing before you can execute other Layer 3 IPv6 multicast commands in

the public network or VPN instance.

The device does not forward any IPv6 multicast packets before IPv6 multicast routing is enabled.

Examples

# Enable IPv6 multicast routing and enter IPv6 MRIB view on the public network.

<Sysname> system-view

[Sysname] ipv6 multicast routing

[Sysname-mrib6]

# Enable IPv6 multicast routing and enter IPv6 MRIB view in the VPN instance mvpn.

<Sysname> system-view

[Sysname] ipv6 multicast routing vpn-instance mvpn

[Sysname-mrib6-mvpn]