4000 Router Series IP Multicast Command Reference

128

Usage guidelines

This command cannot remove the static MLD group entries.

Execution of this command might interrupt the IPv6 multicast information transmission.

Examples

# Remove the dynamic group entries for all MLD groups on all interfaces on the public network.

<Sysname> reset mld group all

# Remove the dynamic group entries for MLD groups on Ethernet 1/1 on the public network.

<Sysname> reset mld group interface ethernet 1/1 all

# Remove the dynamic group entry for the MLD group FF03::101:10 on Ethernet 1/1 on the public

network.

<Sysname> reset mld group interface ethernet 1/1 ff03::101:10

Related commands

display mld group