HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

8
display l2-multicast ip
Use display l2-multicast ip to display information about Layer 2 IP multicast groups.
Syntax
MSR2000/MSR3000:
display l2-multicast ip [ group group-address | source source-address ] * [ vlan vlan-id ]
MSR4000:
display l2-multicast ip [ group group-address | source source-address ] * [ vlan vlan-id ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address: Specifies a multicast group by its IP address. The group-address argument can be
0.0.0.0 or in the range of 224.0.1.0 to 239.255.255.255. If no multicast group is specified, this
command displays information about all Layer 2 IP multicast groups.
source source-address: Specifies a multicast source by its IP address. If no multicast source is specified,
this command displays information about Layer 2 IP multicast groups for all multicast sources.
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, this command
displays information about Layer 2 IP multicast groups for all VLANs.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the Layer 2 IP multicast groups on the MPU. (MSR4000.)
Examples
# Display information about the Layer 2 IP multicast groups for VLAN 2.
<Sysname> display l2-multicast ip vlan 2
Total 1 entries.
VLAN 2: Total 1 IP entries.
(0.0.0.0, 224.1.1.1)
Attribute: static, success
Host slots (1 in total):
2
Host ports (1 in total):
Eth1/1 (S, SUC)
Table 7 Command output
Field Descri
p
tion
Total 1 entries Total number of Layer 2 IP multicast groups.
VLAN 2: Total 1 IP entries Total number of Layer 2 IP multicast groups in VLAN 2.