HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

141
Field Descri
p
tion
Override interval Interval between two override messages.
State refresh interval
Interval for refreshing state.
This field is displayed only when the IPv6 PIM neighbor is operating in
IPv6 PIM-DM mode and the state refresh feature is enabled.
Neighbor tracking Neighbor tracking status: enabled/disabled.
Secondary address(es) Secondary IPv6 address (non-link-local address) of the IPv6 PIM neighbor.
display ipv6 pim routing-table
Use display ipv6 pim routing-table to display IPv6 PIM routing table information.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] routing-table [ ipv6-group-address [ prefix-length ]
| ipv6-source-address [ prefix-length ] | flags flag-value | fsm | incoming-interface interface-type
interface-number | mode mode-type | outgoing-interface { exclude | include | match } interface-type
interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays IPv6 PIM routing table
information on the public network.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address in the range of FFxy::/16,
where x and y represent any hexadecimal numbers between 0 and F, inclusive. If you do not specify an
IPv6 multicast group, this command displays IPv6 PIM routing entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the prefix length of the IPv6 multicast group or IPv6 multicast source address. The
default value is 128. For an IPv6 multicast group address, the value for this argument is in the range of
8 to 128. For an IPv6 multicast source address, the value for this argument is in the range of 0 to 128.
flags flag-value: Specifies a flag. If you do not specify a flag, this command displays IPv6 PIM routing
entries that contain all flags.
The following lists the values for the flag-value argument and their meanings:
• act: Specifies IPv6 PIM routing entries that have been used for routing data.
• del: Specifies IPv6 PIM routing entries to be deleted.
• exprune: Specifies IPv6 PIM routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
• ext: Specifies IPv6 PIM routing entries containing outgoing interfaces provided by other multicast
routing protocols.