HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

142
• loc: Specifies IPv6 PIM routing entries on the devices that reside on the same subnet as the IPv6
multicast source.
• niif: Specifies IPv6 PIM routing entries containing unknown incoming interfaces.
• nonbr: Specifies IPv6 PIM routing entries with IPv6 PIM neighbor lookup failure.
• rpt: Specifies IPv6 PIM routing entries on the RPT branches where (S, G) prunes have been sent to
the RP.
• spt: Specifies IPv6 PIM routing entries on the SPT.
• swt: Specifies IPv6 PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies IPv6 PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify an incoming interface, this command displays IPv6 PIM routing entries that contain all incoming
interfaces.
interface-type interface-number: Specifies an interface by its type and number.
mode mode-type: Specifies an IPv6 PIM mode. If you do not specify an IPv6 PIM mode, this command
displays IPv6 PIM routing entries in all modes. The available IPv6 PIM modes include:
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
• ssm: Specifies IPv6 PIM-SSM.
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, this command displays IPv6 PIM routing entries that
contain all outgoing interfaces. Whether the specified outgoing interface is contained in the IPv6 PIM
routing table depends on the following conditions:
• If you specify an excluded interface, this command displays IPv6 PIM routing entries that do not
contain the specified outgoing interface.
• If you specify an included interface, this command displays IPv6 PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, this command displays IPv6 PIM routing entries that contain
only the specified outgoing interface.
Examples
# Display IPv6 PIM routing table information on the public network.
<Sysname> display ipv6 pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(2001::2, FFE3::101)
RP: FE80::A01:100:1
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Ethernet1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/2