HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

145
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays RP information on the public
network.
ipv6-group-address: Specifies an IPv6 multicast group by its address in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal numbers from
0 to F, inclusive. If no IPv6 multicast group is specified, this command displays information about all RPs
for IPv6 multicast groups.
Examples
# Display information about the RP for the IPv6 multicast group FF0E::101 on the public network.
<Sysname> display ipv6 pim rp-info ff0e::101
BSR RP address is: 7:12::1
Priority: 192
HoldTime: 180
Uptime: 03:01:10
Expires: 00:02:30
Static RP address is: 7:12::1
Preferred: No
Configured ACL: 2003
RP mapping for this group is: 7:12::1 (local host)
# Display information about all RPs for all IPv6 multicast groups.
<Sysname> display ipv6 pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF00::/8
RP address Priority HoldTime Uptime Expires
8:12::2 (local) 192 180 03:01:36 00:02:29
Group/MaskLen: FF23::/92
RP address Priority HoldTime Uptime Expires
7:12::1 (local) 192 180 00:00:39 00:02:57
Static RP information:
RP address ACL Mode Preferred
3:3::1 2000 pim-sm No
3:3::2 2001 pim-sm Yes
3:3::3 2002 pim-sm No
3:3::4 pim-sm No
3:3::5 2002 pim-sm Yes
Table 47 Command output
Field Descri
p
tion
Group/MaskLen IPv6 multicast group to which the RP is designated.
(local) Local RP. If the RP is not a locally configured RP, this field is not displayed.
Priority Priority of the RP.