HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

146
Field Descri
p
tion
HoldTime RP lifetime.
Uptime Length of time the RP has been up.
Expires Remaining time of the RP lifetime.
Preferred Whether the static RP is preferred.
Configured ACL/ACL ACL defining the IPv6 multicast groups to which the static RP is designated.
Mode RP service mode. Only IPv6 PIM-SM is supported.
RP mapping for this group IPv6 address of the RP that provides services for the IPv6 multicast group.
hello-option dr-priority (IPv6 PIM view)
Use hello-option dr-priority to set the global priority for DR election.
Use undo hello-option dr-priority to restore the default.
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
Default
The global priority for DR election is 1.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
priority: Sets the priority for DR election, in the range of 0 to 4294967295. A larger value represents a
higher priority.
Usage guidelines
You can set the priority for DR election in IPv6 PIM view or interface view. The configurations made in
IPv6 PIM view take effect on all interfaces, and the configurations made in interface view take effect only
on the current interface. If you set the priority for DR election in both IPv6 PIM view and interface view,
the configuration in interface view always takes precedence.
Examples
# Set the global priority for DR election to 3 on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option dr-priority 3
Related commands
ipv6 pim hello-option dr-priority