HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

152
ipv6 pim bsr-boundary
Use ipv6 pim bsr-boundary to configure an IPv6 PIM domain border (a bootstrap message boundary).
Use ipv6 pim bsr-boundary to remove the configured IPv6 PIM domain border.
Syntax
ipv6 pim bsr-boundary
undo ipv6 pim bsr-boundary
Default
No PIM domain border is configured.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure Ethernet 1/1 as a PIM domain border.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 pim bsr-boundary
Related commands
• c-bsr (IPv6 PIM view)
• ipv6 multicast boundary
ipv6 pim dm
Use ipv6 pim dm to enable IPv6 PIM-DM.
Use undo ipv6 pim dm to disable IPv6 PIM-DM.
Syntax
ipv6 pim dm
undo ipv6 pim dm
Default
IPv6 PIM-DM is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only after IPv6 multicast routing is enabled in the public network or VPN
instance.