HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

10
source source-address: Specifies a multicast source by its IP address. If no multicast source is specified,
this command displays information about Layer 2 IP multicast group entries for all multicast sources.
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, this command
displays information about Layer 2 IP multicast group entries for all VLANs.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the Layer 2 IP multicast group entries on the MPU. (MSR4000.)
Examples
# Display information about the Layer 2 IP multicast group entries in VLAN 2.
<Sysname> display l2-multicast ip forwarding vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Host slots (1 in total):
1
Host ports (3 in total):
Eth1/1
Eth1/2
Eth1/3
Table 8 Command output
Field Descri
p
tion
Total 1 entries Total number of Layer 2 IP multicast group entries.
VLAN 2: Total 1 entries Total number of Layer 2 IP multicast group entries in VLAN 2.
(0.0.0.0, 224.1.1.1)
(S, G) entry. If the multicast source is not specified, the field in the S position
displays 0.0.0.0.
Host slots (1 in total)
Total number of cards where the member ports reside and the slot IDs of the
cards.
Host ports (3 in total) Total number of member ports and the port list.
display l2-multicast mac
Use display l2-multicast mac to display information about Layer 2 MAC multicast groups
Syntax
MSR2000/MSR3000:
display l2-multicast mac [ mac-address ] [ vlan vlan-id ]
MSR4000:
display l2-multicast mac [ mac-address ] [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin