HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

154
ipv6 pim hello-option holdtime
Use ipv6 pim hello-option holdtime to set the IPv6 PIM neighbor lifetime on an interface.
Use undo ipv6 pim hello-option holdtime to restore the default.
Syntax
ipv6 pim hello-option holdtime time
undo ipv6 pim hello-option holdtime
Default
The IPv6 PIM neighbor lifetime is 105 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the IPv6 PIM neighbor lifetime in the range of 1 to 65535 seconds. If the value for this
argument is 65535, the IPv6 PIM neighbor is always reachable.
Usage guidelines
You can set the IPv6 PIM neighbor lifetime in IPv6 PIM view or interface view. The configurations made
in IPv6 PIM view take effect on all interfaces, and the configurations made in interface view take effect
only on the current interface. If you set the IPv6 PIM neighbor lifetime in both IPv6 PIM view and interface
view, the configuration in interface view always takes precedence.
Examples
# Sets the IPv6 PIM neighbor lifetime to 120 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 pim hello-option holdtime 120
Related commands
hello-option holdtime (IPv6 PIM view)
ipv6 pim hello-option lan-delay
Use ipv6 pim hello-option lan-delay to set the prune delay on an interface.
Use undo ipv6 pim hello-option lan-delay to restore the default.
Syntax
ipv6 pim hello-option lan-delay delay
undo ipv6 pim hello-option lan-delay
Default
The prune delay is 500 milliseconds.