HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

157
Examples
# Set the override interval to 2000 milliseconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 pim hello-option override-interval 2000
Related commands
• hello-option lan-delay (IPv6 PIM view)
• hello-option override-interval (IPv6 PIM view)
• ipv6 pim hello-option lan-delay
ipv6 pim holdtime join-prune
Use ipv6 pim holdtime join-prune to set the joined/pruned state holdtime timer on an interface.
Use undo ipv6 pim holdtime join-prune to restore the default.
Syntax
ipv6 pim holdtime join-prune time
undo ipv6 pim holdtime join-prune
Default
The joined/pruned state holdtime timer is 210 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer in the range of 1 to 65535 seconds.
Usage guidelines
You can set the joined/pruned state holdtime timer in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view take effect on all interfaces, and the configurations made in interface view take
effect only on the current interface. If you set the joined/pruned state holdtime timer in both IPv6 PIM view
and interface view, the configuration in interface view always takes precedence.
Examples
# Set the joined/pruned state holdtime timer to 280 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 pim holdtime join-prune 280
Related commands
holdtime join-prune (IPv6 PIM view)