4000 Router Series IP Multicast Command Reference

159

Views

Interface view

Predefined user roles

network-admin

Examples

# Enable Ethernet 1/1 to drop hello messages without the generation ID options.

<Sysname> system-view

[Sysname] interface ethernet 1/1

[Sysname-Ethernet1/1] ipv6 pim require-genid

ipv6 pim sm

Use ipv6 pim sm to enable IPv6 PIM-SM.

Use undo ipv6 pim sm to disable IPv6 PIM-SM.

Syntax

ipv6 pim sm

undo ipv6 pim sm

Default

IPv6 PIM-SM is disabled.

Views

Interface view

Predefined user roles

network-admin

Usage guidelines

This command takes effect only after you enable IPv6 multicast routing in the public network or VPN

instance.

Examples

# On the public network, enable IPv6 multicast routing, and enable IPv6 PIM-SM on Ethernet 1/1.

<Sysname> system-view

[Sysname] ipv6 multicast routing

[Sysname-mrib6] quit

[Sysname] interface ethernet 1/1

[Sysname-Ethernet1/1] ipv6 pim sm

Related commands

ipv6 multicast routing

ipv6 pim state-refresh-capable

Use ipv6 pim state-refresh-capable to enable the state refresh feature on the interface.

Use undo ipv6 pim state-refresh-capable to disable the state refresh feature.