HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

160
Syntax
ipv6 pim state-refresh-capable
undo ipv6 pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable state refresh on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] undo ipv6 pim state-refresh-capable
Related commands
• state-refresh-hoplimit (IPv6 PIM view)
• state-refresh-interval (IPv6 PIM view)
• state-refresh-rate-limit (IPv6 PIM view)
ipv6 pim timer graft-retry
Use ipv6 pim timer graft-retry to set the graft retry timer.
Use undo ipv6 pim timer graft-retry to restore the default.
Syntax
ipv6 pim timer graft-retry interval
undo ipv6 pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Specifies a graft retry timer in the range of 1 to 65535 seconds.
Examples
# Set the graft retry timer to 80 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 pim timer graft-retry 80