4000 Router Series IP Multicast Command Reference

168

[Sysname] acl ipv6 number 2000

[Sysname-acl6-basic-2000] rule permit source ff3e:0:8192:: 96

[Sysname-acl6-basic-2000] quit

[Sysname] ipv6 pim

[Sysname-pim6] ssm-policy 2000

state-refresh-hoplimit (IPv6 PIM view)

Use state-refresh-hoplimit to set the hop limit for state refresh messages.

Use undo state-refresh-hoplimit to restore the default.

Syntax

state-refresh-hoplimit hoplimit-value

undo state-refresh-hoplimit

Default

The hop limit for state refresh messages is 255.

Views

IPv6 PIM view

Predefined user roles

network-admin

Parameters

hoplimit-value: Specifies a hop limit for state refresh messages, in the range of 1 to 255.

Examples

# Set the hop limit for state refresh messages to 45 on the public network.

<Sysname> system-view

[Sysname] ipv6 pim

[Sysname-pim6] state-refresh-hoplimit 45

Related commands

• ipv6 pim state-refresh-capable

• state-refresh-interval (IPv6 PIM view)

• state-refresh-rate-limit (IPv6 PIM view)

state-refresh-interval (IPv6 PIM view)

Use state-refresh-interval to set the interval for sending state refresh messages.

Use undo state-refresh-interval to restore the default.

Syntax

state-refresh-interval interval

undo state-refresh-interval

Default

The state refresh interval is 60 seconds.