HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

172
timer join-prune (IPv6 PIM view)
Use timer join-prune to configure the global interval for sending the join/prune messages.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The global interval for sending the join/prune messages is 60 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
interval: Sets the global interval for sending the join/prune messages, in the range of 0 to 18000
seconds. If the value for this argument is 0, no join or prune messages are sent.
Usage guidelines
You can set the interval for sending the join/prune messages in IPv6 PIM view or interface view. The
configurations made in IPv6 PIM view take effect on all interfaces, and the configurations made in
interface view take effect only on the current interface. If you set the interval in both IPv6 PIM view and
interface view, the configuration in interface view always takes precedence.
Examples
# Set the global interval for sending the join/prune messages to 80 seconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] timer join-prune 80
Related commands
ipv6 pim timer join-prune