HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

16
host-aging-time (IGMP-snooping view)
Use host-aging-time to set the aging timer for dynamic member ports globally.
Use undo host-aging-time to restore the default.
Syntax
host-aging-time interval
undo host-aging-time
Default
The default setting is 260 seconds.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
interval: Sets an aging timer for dynamic member ports, in the range of 200 to 1000 seconds.
Usage guidelines
The global configuration takes effect on all VLANs, but has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the aging timer for dynamic member ports to 300 seconds globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] host-aging-time 300
Related commands
igmp-snooping host-aging-time
igmp-snooping
Use igmp-snooping to enable IGMP snooping globally and enter IGMP-snooping view.
Use undo igmp-snooping to disable IGMP snooping globally.
Syntax
igmp-snooping
undo igmp-snooping
Default
IGMP snooping is disabled.
Views
System view