HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

22
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping last-listener-query-interval 3
Related commands
• igmp-snooping enable
• last-member-query-interval (IGMP-snooping view)
igmp-snooping max-response-time
Use igmp-snooping max-response-time to set the maximum response time for IGMP general queries in
the VLAN.
Use undo igmp-snooping max-response-time to restore the default.
Syntax
igmp-snooping max-response-time interval
undo igmp-snooping max-response-time
Default
The default setting is 10 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interval: Sets the maximum response time for IGMP general queries, in the range of 1 to 25 seconds.
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command for the VLAN.
The configuration made in VLAN view takes effect only on the current VLAN and takes preference over
the global configuration.
Examples
# Enable IGMP snooping for VLAN 2 and set the maximum response time for IGMP general queries to
5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping max-response-time 5
Related commands
• igmp-snooping enable
• max-response-time (IGMP-snooping view)