HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

30
Syntax
reset igmp-snooping statistics
Views
User view
Predefined user roles
network-admin
Examples
# Clear the statistics for all IGMP messages learned by IGMP snooping.
<Sysname> reset igmp-snooping statistics
Related commands
display igmp-snooping statistics
router-aging-time (IGMP-snooping view)
Use router-aging-time to set the global aging timer for dynamic router ports.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The default setting is 260 seconds.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
interval: Specifies an aging timer for dynamic router ports, in the range of 1 to 1000 seconds.
Usage guidelines
The global configuration takes effect on all VLANs, but has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the global aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] router-aging-time 100
Related commands
igmp-snooping router-aging-time