HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

32
Multicast routing and forwarding commands
delete ip rpf-route-static
Use delete ip rpf-route-static to delete all static multicast routes.
Syntax
delete ip rpf-route-static [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command deletes all static multicast routes on the
public network.
Usage guidelines
This command deletes all static multicast routes, but the undo ip rpf-route-static command deletes a static
multicast route.
Examples
# Delete all static multicast routes on the public network.
<Sysname> system-view
[Sysname] delete ip rpf-route-static
This will erase all multicast static routes and their configurations, you must reconfigure
all static routes.
Are you sure?[Y/N]:y
Related commands
ip rpf-route-static
display mac-address multicast
Use display mac-address multicast to display the static multicast MAC address entries.
Syntax
display mac-address [ mac-address [ vlan vlan-id ] | [ multicast ] [ vlan vlan-id ] [ count ] ]
Views
Any view
Predefined user roles
network-admin
network-operator