4000 Router Series IP Multicast Command Reference

Field Descri

tion

(172.168.0.2, 227.0.0.1) (S, G) entry of the multicast forwarding table.

Uptime Length of time for which the (S, G) entry has been up.

Upstream Interface

Upstream interface of the (S, G) entry that multicast packets should

arrive at.

List of 2 downstream interfaces List of downstream interfaces that need to forward multicast packets.

Related commands

reset multicast routing-table

display multicast routing-table static

Use display multicast routing-table static to display static multicast routing entries.

Syntax

display multicast [ vpn-instance vpn-instance-name ] routing-table static [ source-address { mask-length

| mask } ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. If this option is not specified, the command displays information about static

multicast routes on the public network.

source-address: Specifies a multicast source address.

mask-length: Specifies the address mask length in the range of 0 to 32.

mask: Specifies the address mask.

Usage guidelines

This command displays information about only valid static multicast routes.

Examples

# Display information about static multicast routing entries on the public network.

<Sysname> display multicast routing-table static

Destinations : 3 Routes : 4

Destination/Mask Pre RPF Neighbor Interface

1.1.0.0/16 10 7.12.0.1 Vlan12

7.11.0.1 Vlan11

2.2.2.0/24 20 7.11.0.1 Vlan11

3.3.3.3/32 50 7.12.0.1 Vlan12