HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

54
Table 21 Command output
Field Descri
p
tion
Ethernet1/1(10.10.1.20) Interface (IP address).
Query interval for IGMP IGMP general query interval, in seconds.
Other querier present time for IGMP Other querier present interval, in seconds.
Maximum query response time for IGMP Maximum response delay for IGMP general queries, in seconds.
Last member query interval IGMP last-member query interval, in seconds.
Startup query interval IGMP startup query interval, in seconds.
Startup query count
Number of IGMP general queries that the device sends on
startup.
General query timer expiry
Remaining time of the IGMP general query timer. If the timer
never expires, this field displays Off.
Querier for IGMP IP address of the IGMP querier.
IGMP activity: 1 join(s), 0 leave(s)
Statistics of IGMP activities:
• Join(s)—Total number of multicast groups that this interface
has joined.
• Leave(s)—Total number of multicast groups that this interface
has left.
Multicast routing on this interface Whether the multicast routing and forwarding is enabled.
Robustness Robustness variable of the IGMP querier.
Require-router-alert
Whether the function of dropping of IGMP messages without
Router-Alert is enabled.
Fast-leave Whether the fast-leave processing is enabled.
SSM-mapping Whether IGMP SSM mapping is enabled.
Startup-query
Whether the IGMP querier sends IGMP general queries at the
startup query interval on startup:
• On—The IGMP querier performs the above action.
• Off—The IGMP querier does not perform the above action.
Other-querier-present-timer-expiry
Remaining time of the other querier present timer. If the timer
never expires, this field displays Off.
IGMP proxy interface
IGMP proxy interface. If no proxy interface exists, this field
displays None.
IGMP groups reported in total
Total number of multicast groups that the interface has
dynamically joined. This field is not displayed if no interfaces join
the IGMP group.
igmp enable
Use igmp enable to enable IGMP on an interface.
Use undo igmp enable to disable IGMP on an interface.