4000 Router Series IP Multicast Command Reference

Field Descri

tion

Expires/Expiry time

Time remaining of the PIM neighbor lifetime. If the PIM neighbor is always

up and reachable, this field displays never.

DR-Priority/DR Priority Priority of the PIM neighbor.

Generation ID

Generation ID of the PIM neighbor. (A random value that represents a

status change of the PIM neighbor.)

Holdtime

Lifetime of the PIM neighbor. If the PIM neighbor is always up and

reachable, this field displays forever.

LAN delay Delay for sending prune messages.

Override interval Interval between two override messages.

State refresh interval

Interval for refreshing state. This field is displayed only when the PIM

neighbor operates in PIM-DM mode and the state refresh capability is

enabled.

Neighbor tracking Neighbor tracking status: enabled/disabled.

display pim routing-table

Use display pim routing-table to display PIM routing table information.

Syntax

display pim [ vpn-instance vpn-instance-name ] routing-table [ group-address [ mask { mask-length |

mask } ] | source-address [ mask { mask-length | mask } ] | flags flag-value | fsm | incoming-interface

interface-type interface-number | mode mode-type | outgoing-interface { exclude | include | match }

interface-type interface-number ] *

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. If this option is not specified, the command displays PIM routing table information

on the public network.

group-address: Specifies a multicast group by its IP address in the range of 224.0.0.0 to

239.255.255.255. If you do not specify a multicast group, this command displays PIM routing entries for

all multicast groups.

source-address: Specifies a multicast source by its IP address.

mask-length: Specifies the address mask length in the range of 0 to 32. The default value is 32.

mask: Specifies the address mask. The default value is 255.255.255.255.

flags flag-value: Specifies a flag. If you do not specify a flag, this command displays PIM routing entries

that contain all flags. The following lists the values for the flag-value argument and their meanings: