HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

82
Usage guidelines
You can set the joined/pruned state holdtime timer in PIM view or interface view. The configurations
made in PIM view take effect on all interfaces and the configurations made in interface view take effect
only on the current interface. If you set the joined/pruned state holdtime timer in both PIM view and
interface view, the configuration in interface view always takes precedence.
Examples
# Set the global joined/pruned state holdtime timer to 280 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280
Related commands
pim holdtime join-prune
jp-pkt-size (PIM view)
Use jp-pkt-size to set the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size size
undo jp-pkt-size
Default
The maximum size of a join/prune message is 8100 bytes.
Views
PIM view
Predefined user roles
network-admin
Parameters
size: Sets the maximum size of each join/prune message, in the range of 100 to 8100 bytes.
Examples
# Set the maximum size of each join/prune message to 1500 bytes on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] jp-pkt-size 1500
pim
Use pim to enter PIM view.
Use undo pim to remove all configurations in PIM view.
Syntax
pim [ vpn-instance vpn-instance-name ]