HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

89
Predefined user roles
network-admin
Parameters
interval: Sets the override interval in the range of 1 to 65535 milliseconds.
Usage guidelines
You can set the override interval in PIM view or interface view. The configurations made in PIM view take
effect on all interfaces, and the configurations made in interface view take effect only on the current
interface. If you set the override interval in both PIM view and interface view, the configuration in
interface view always takes precedence.
Examples
# Set the override interval to 2000 milliseconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim hello-option override-interval 2000
Related commands
• hello-option lan-delay (PIM view)
• hello-option override-interval (PIM view)
• pim hello-option lan-delay
pim holdtime join-prune
Use pim holdtime join-prune to set the joined/pruned state holdtime timer on an interface.
Use undo pim holdtime join-prune to restore the default.
Syntax
pim holdtime join-prune time
undo pim holdtime join-prune
Default
The joined/pruned state holdtime timer is 210 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer in the range of 1 to 65535 seconds.
Usage guidelines
You can set the joined/pruned state holdtime timer in PIM view or interface view. The configurations
made in PIM view take effect on all interfaces, and the configurations made in interface view take effect
only on the current interface. If you set the joined/pruned state holdtime timer in both PIM view and
interface view, the configuration in interface view always takes precedence.