HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

91
Use undo pim require-genid to restore the default.
Syntax
pim require-genid
undo pim require-genid
Default
Hello messages without the generation ID options are accepted.
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable Ethernet 1/1 to drop hello messages without the generation ID options.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim require-genid
pim sm
Use pim sm to enable PIM-SM.
Use undo pim sm to disable PIM-SM.
Syntax
pim sm
undo pim sm
Default
PIM-SM is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only after you enable IP multicast routing in the public network or VPN
instance.
Examples
# On the public network, enable IP multicast routing, and enable PIM-SM on Ethernet 1/1.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim sm