HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

93
Parameters
interval: Specifies a graft retry timer in the range of 1 to 65535 seconds.
Examples
# Set the graft retry timer to 80 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim timer graft-retry 80
pim timer hello
Use pim timer hello to set the interval for sending hello messages on an interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
undo pim timer hello
Default
The interval for sending hello messages is 30 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the interval for sending hello messages, in the range of 0 to 18000 seconds. If the value for
this argument is 0, no hello messages are sent.
Usage guidelines
You can set the interval for sending hello messages in PIM view or interface view. The configurations
made in PIM view take effect on all interfaces, and the configurations made in interface view take effect
only on the current interface. If you set the interval in both PIM view and interface view, the configuration
in interface view always takes precedence.
Examples
# Set the interval for sending hello messages to 40 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim timer hello 40
Related commands
timer hello (PIM view)
pim timer join-prune
Use pim timer join-prune to set interval for sending the join/prune messages on an interface.
Use undo pim timer join-prune to restore the default.