HP MSR2000/3000/4000 Router Series IP Multicast Configuration Guide

155
[RouterA] display ipv6 pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:46
Elected BSR address: 1003::2
Priority: 20
Hash mask length: 128
Uptime: 00:04:22
# Display BSR information on Router D.
[RouterD] display ipv6 pim bsr-info
Scope: non-scoped
State: Candidate
Bootstrap timer: 00:01:45
Elected BSR address: 1003::2
Priority: 20
Hash mask length: 128
Uptime: 00:05:26
Candidate BSR address: 4002::1
Priority: 10
Hash mask length: 128
# Display BSR information on Router E.
[RouterE] display ipv6 pim bsr-info
Scope: non-scoped
State: Elected
Bootstrap timer: 00:01:48
Elected BSR address: 1003::2
Priority: 20
Hash mask length: 128
Uptime: 00:01:10
Candidate BSR address: 1003::2
Priority: 20
Hash mask length: 128
# Display RP information on Router A.
[RouterA] display ipv6 pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF0E::101/64
RP address Priority HoldTime Uptime Expires
1003::2 192 180 00:05:19 00:02:11
4002::1 192 180 00:05:19 00:02:11
IPv6 PIM-SM admin-scoped zone configuration example
Network requirements
As shown in Figure 54, VOD streams are sent to receiver hosts in multicast. The entire IPv6 PIM-SM
domain is divided into IPv6 admin-scoped zone 1, IPv6 admin-scoped zone 2, and the IPv6
global-scoped zone. Router B, Router C, and Router D are ZBRs of the three zones, respectively.