HP MSR2000/3000/4000 Router Series IP Multicast Configuration Guide

158
# On Router B, configure Ethernet 1/3 and Ethernet 1/4 as the boundaries of IPv6 admin-scoped
zone 1.
[RouterB] interface ethernet 1/3
[RouterB-Ethernet1/3] ipv6 multicast boundary scope 4
[RouterB-Ethernet1/3] quit
[RouterB] interface ethernet 1/4
[RouterB-Ethernet1/4] ipv6 multicast boundary scope 4
[RouterB-Ethernet1/4] quit
# On Router C, configure Ethernet 1/4 and Ethernet 1/5 as the boundaries of IPv6 admin-scoped
zone 2.
<RouterC> system-view
[RouterC] interface ethernet 1/4
[RouterC-Ethernet1/4] ipv6 multicast boundary scope 4
[RouterC-Ethernet1/4] quit
[RouterC] interface ethernet 1/5
[RouterC-Ethernet1/5] ipv6 multicast boundary scope 4
[RouterC-Ethernet1/5] quit
# On Router D, configure Ethernet 1/3 as the boundary of IPv6 admin-scoped zone 2.
<RouterD> system-view
[RouterD] interface ethernet 1/3
[RouterD-Ethernet1/3] ipv6 multicast boundary scope 4
[RouterD-Ethernet1/3] quit
5. Configure C-BSRs and C-RPs:
# On Router B, configure the service scope of RP advertisements and configure Ethernet 1/2 as a
C-BSR and a C-RP for IPv6 admin-scoped zone 1.
[RouterB] ipv6 pim
[RouterB-pim6] c-bsr 1002::2 scope 4
[RouterB-pim6] c-rp 1002::2 scope 4
[RouterB-pim6] quit
# On Router D, configure the service scope of RP advertisements and configure Ethernet 1/1 as a
C-BSR and a C-RP for IPv6 admin-scoped zone 2.
[RouterD] ipv6 pim
[RouterD-pim6] c-bsr 3003::2 scope 4
[RouterD-pim6] c-rp 3003::2 scope 4
[RouterD-pim6] quit
# On Router F, configure Ethernet 1/1 as a C-BSR and a C-RP for the IPv6 global-scoped zone.
<RouterF> system-view
[RouterF] ipv6 pim
[RouterF-pim6] c-bsr 8001::1
[RouterF-pim6] c-rp 8001::1
[RouterF-pim6] quit
Verifying the configuration
# Display BSR information on Router B.
[RouterB] display ipv6 pim bsr-info
Scope: non-scoped
State: Accept Preferred