4000 Router Series IP Multicast Configuration Guide

161

RP address Priority HoldTime Uptime Expires

1002::2 (local) 192 180 00:02:03 00:02:56

Group/MaskLen: FFE4::/16

RP address Priority HoldTime Uptime Expires

1002::2 (local) 192 180 00:02:03 00:02:56

Group/MaskLen: FFF4::/16

RP address Priority HoldTime Uptime Expires

1002::2 (local) 192 180 00:02:03 00:02:56

Group/MaskLen: FF04::/16

RP address Priority HoldTime Uptime Expires

1002::2 (local) 192 180 00:02:03 00:02:56

# Display RP information on Router F.

[RouterF] display pim rp-info

BSR RP information:

Scope: non-scoped

Group/MaskLen: FF00::/8

RP address Priority HoldTime Uptime Expires

8001::1 (local) 192 180 00:10:28 00:02:31

IPv6 PIM-SSM configuration example

Network requirements

The receivers receive VOD information through multicast. The receiver groups of different organizations

form stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM

domain operates in the SSM mode.

Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.

The SSM group range is FF3E::/64.

MLDv2 runs between Router A and N1 and between Router B, Router C, and N2.