4000 Router Series IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

191

192

193

194

195

196

197

198

199

200

184

[PE1-bgp] peer 1.1.1.3 group vpn-g

[PE1–bgp] ip vpn-instance a

[PE1-bgp-a] address-family ipv4

[PE1-bgp-ipv4-a] import-route rip 2

[PE1-bgp-ipv4-a] import-route direct

[PE1-bgp-ipv4-a] quit

[PE1-bgp-a] quit

[PE1–bgp] address-family vpnv4

[PE1–bgp-vpnv4] peer vpn-g enable

[PE1–bgp-vpnv4] quit

[PE1–bgp] quit

# Create MD for VPN instance a and specify the default-group address and the MD source

interface address for it.

[PE1] multicast-domain vpn-instance a

[PE1-md-a] default-group 239.1.1.1

[PE1-md-a] source loopback 1

[PE1-md-a] quit

# Configure OSPF.

[PE1] ospf 1

[PE1-ospf-1] area 0.0.0.0

[PE1-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0

[PE1-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.255.255

[PE1-ospf-1-area-0.0.0.0] quit

[PE1-ospf-1] quit

# Configure RIP.

[PE1] rip 2 vpn-instance a

[PE1-rip-2] network 10.0.0.0

[PE1-rip-2] import-route bgp

[PE1-rip-2] return

2. Configure PE 2:

# Configure a Router ID globally and enable IP multicast routing on the public network.

<PE2> system-view

[PE2] router id 1.1.1.2

[PE2] multicast routing

[PE2-mrib] quit

# Configure an MPLS LSR ID and enable the LDP capability.

[PE2] mpls lsr-id 1.1.1.2

[PE2] mpls ldp

[PE2-ldp] quit

# Create VPN instance b and configure an RD and route target attributes for it.

[PE2] ip vpn-instance b

[PE2-vpn-instance-b] route-distinguisher 200:1

[PE2-vpn-instance-b] vpn-target 200:1 export-extcommunity

[PE2-vpn-instance-b] vpn-target 200:1 import-extcommunity

[PE2-vpn-instance-b] quit

# Enable IP multicast routing in VPN instance b.

[PE2] multicast routing vpn-instance a