4000 Router Series IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

191

192

193

194

195

196

197

198

199

200

188

[PE3-LoopBack1] quit

# Bind Loopback 2 with VPN instance b, assign an IP address to Loopback 2, and enable PIM-SM

on the interface.

[PE3] interface loopback 2

[PE3-LoopBack2] ip binding vpn-instance b

[PE3-LoopBack2] ip address 33.33.33.33 32

[PE3-LoopBack2] pim sm

[PE3-LoopBack2] quit

# Configure Loopback 2 as a C-BSR and C-RP for VPN instance b.

[PE3] pim vpn-instance b

[PE3-pim-b] c-bsr 33.33.33.33

[PE3-pim-b] c-rp 33.33.33.33

[PE3-pim-b] quit

# Configure BGP.

[PE3] bgp 100

[PE3-bgp] group vpn-g internal

[PE3-bgp] peer vpn-g connect-interface loopback 1

[PE3-bgp] peer 1.1.1.1 group vpn-g

[PE3-bgp] peer 1.1.1.2 group vpn-g

[PE3–bgp] ip vpn-instance a

[PE3-bgp-a] address-family ipv4

[PE3-bgp-ipv4-a] import-route rip 2

[PE3-bgp-ipv4-a] import-route direct

[PE3-bgp-ipv4-a] quit

[PE3-bgp-a] quit

[PE3–bgp] ip vpn-instance b

[PE3-bgp-b] address-family ipv4

[PE3-bgp-ipv4-b] import-route rip 3

[PE3-bgp-ipv4-b] import-route direct

[PE3-bgp-ipv4-b] quit

[PE3-bgp-b] quit

[PE3–bgp] address-family vpnv4

[PE3–bgp-vpnv4] peer vpn-g enable

[PE3–bgp-vpnv4] quit

[PE3–bgp] quit

# Create MD for VPN instance a and specify the default-group address and the MD source

interface address.

[PE3] multicast-domain vpn-instance a

[PE3-md-a] default-group 239.1.1.1

[PE3-md-a] source loopback 1

[PE3-md-a] quit

# Create MD for VPN instance b and specify the default-group address and the MD source

interface address.

[PE3] multicast-domain vpn-instance b

[PE3-md-b] default-group 239.2.2.2

[PE3-md-b] source loopback 1

[PE3-md-b] quit